This article exists as part of the online archive for HuffPost Australia, which closed in 2021.

Skin Cancer-Detecting Device Wins 2017 International Dyson Award

It was developed by four students from Canada.

A remarkable device that can detect skin cancer reliably yet costs a fraction of its rivals has won the International James Dyson Award.

The sKan was created by a team of four electrical and biomedical engineering students from McMasters University and can detect a melanoma by sensing minute changes in temperature on the skin.

Dyson

Michael Takla, Rotimi Fadiya, Shivad Bhavsar and Prateek Mathur were inspired to create the device after they saw the statistics around skin cancer.

"Melanoma has one of the highest survivability's of all cancers, 94%," explains Fadiya. "So it's absolutely crazy that so many people still die even though we know how to cure it."

While equipment exists that can test for skin cancer, the team found there were prohibitive costs involved that were preventing quick and early diagnoses from taking place.

"With these advanced technologies, the cost just keeps creeping up and up and up," explains Mathur. "We found one competitor that had a device that was over $250,000 which is just not obtainable for what we're trying to do."

Mathur and the rest of the team were able to bring the cost of their device down to just $1000, while still maintaining the same levels of accuracy and reliability that doctors would expect.

Dyson

How does sKan work?

An easy way to detect if there is a melanoma is to cool the skin and then measure the rate at which it returns to room temperature.

If a melanoma is present, the skin will heat up much quicker. An easy way to record this is to create a thermal map of the surrounding skin that a doctor can easily see on a display.

Now there are devices out there that can already do this. However the vast majority of them suffer from one major problem. "The issue was that they all use high-end ultra-expensive cameras." explains Shivat.

That's where the sKan comes in.

Dyson

Rather than using expensive thermal imaging, sKan uses a grid of small thermistors which turn electrical signals into thermal readings.

The thermistors themselves are a cheap off-the-shelf component, yet can still detect the minuscule temperature changes needed to make an accurate diagnosis.

Dyson

The readings are then translated into a heat map which can be read by any GP using a piece of software that the students designed and wrote themselves.

Why is sKan such a breakthrough?

Availability. It's as simple as that.

Most of today's devices that can detect skin cancer cost anywhere from $10,000-$250,000, putting them completely out of reach for most GPs.

At $1,000, sKan can provide the same second-source diagnosis for GPs but at a fraction of the cost.

Dyson

The team envisage their prototype being used by GPs as a quick, and reliable tool that can allow someone to walk in, voice their concerns and then be diagnosed quickly and efficiently.

"The doctors office for the most part looks the same as it did 10 years ago," explains Rotima. "It's a fine balance to find tools that physicians could use while still remaining affordable."

What's next for the sKan?

The team have won the 2017 International Dyson Award which means that not only do they get a cash prize of £30,000 (plus £5,000 for their university), but they also get the kudos and recognition that comes with it.

Dyson

Using the publicity and reputation boost of the Dyson Award, the team are hoping to take sKan to pre-clinical trials.

To do that they'll need to create a slicker, more professional-looking prototype. The team are already hard at work miniaturising the device by using smaller, yet more accurate thermistors. They hope to have the next version ready within 6-8 months.

For the moment though, the team of students are just soaking it all in.

Previous Winners Of The James Dyson Award:

  • 2016 - EcoHelmet
The ingenious EcoHelmet is an ultra-strong, recyclable cycling helmet that's waterproof for three hours and folds completely flat thanks to its honeycomb design.

Its designer Isis Shiffer created the helmet after using bike-sharing schemes around the world and realising that there was no easy, cheap access to safety equipment.

According to the Department of Transport, there were more than 3,200 serious injuries to cyclists on the roads in 2015.Ms Shiffer's hope is to sell them alongside the bike sharing stations - like those found in London - for around £4 per helmet.
  • 2015 - Voltera
    James Dyson Awards
    While the 3D printer has evolved at an astonishing pace, another form of rapid printing has sadly been left behind. This technology is the process of creating Printed Circuit Boards (PCB). They're used in everything from smartphones to medical devices and yet for engineers, inventors and students it takes an agonising amount of time to create them.

    Considering the shortage of engineers in the UK (and the world), having a hurdle like this is unacceptable and it's something that four students from the University of Waterloo, Canada set to overcome.

    Voltera is the result of that. It's a laptop-sized PCB printer that can turn design files into prototype printed circuit boards in just minutes. No more delays, no more unnecessary costs, now an inventor can create a circuit on their laptop and have it printed and ready to go within the hour.
  • 2014 - MOM
    James Dyson Awards
    Created by James Roberts, a 23 year old graduate from Loughborough University, the MOM is a low-cost incubator that can be deployed anywhere and can run for up to 24 hours on just battery power alone.

    Roberts' design is a response to shocking statistics from the WHO that 75 per cent of deaths resulting from premature birth could be avoided if inexpensive treatments were more readily available in the developing world.

    Modern incubators can cost upwards of £30,000 making them hugely expensive to both buy, and then distribute. Roberts' new design costs just £250 and is fully portable.
  • 2013 - Titan Arm
    James Dyson Awards
    Created by a team of mechanical engineering students from the University of Pennsylvania, Titan Arm is a robotic arm that can instantly increase human strength. Seeing the number of injuries that are caused by manual labour every single year, the team decided to develop a simple, cheap exoskeleton that could help rehabilitate people with back injuries. It can also work as a supplementary device for workers, helping them lift heavy loads without putting the inevitable strain on their upper body or back. What's really impressive about Titan Arm is that it costs just $2,000 to produce, a major reduction compared to similar exoskeletons that can cost $100,000 and upwards.
  • 2012 - SafetyNet
    James Dyson Awards
    Royal College of Art student Dan Watson created SafetyNet as a means of protecting young and endangered fish from fishing trawlers. It's a beautifully simple concept: The net contains a series of escape holes that are lit up allowing smaller fish to pass safely through the trawler's haul. Watson created his net after discovering the staggering numbers of unmarketable fish that are caught and then thrown back into the sea dead each year.
  • 2011 - Airdrop
    James Dyson Awards
    Edward Linacre from Swinburne University of Technology in Australia created Aidrop after seeing the Murray Darling area of the country get hit by its worst drought in a century. his research found that crops were failing because of soil evaporation, to combat this he created a device that would capture that lost water and put it back into the soil. Airdrop works by taking in air and then running it through a series of underground pipes until it reaches the point of condensation. The water is then pumped directly to the root of the plants.
  • 2010 - Longreach Buoyancy Deployment System
    James Dyson Awards
    Created by Samuel Adeloju the Longreach Buoyancy Deployment System might look like some form of weapon but what it's actually firing is a life-saving buoyancy aid.The package that's fired uses hydrophobic or rapidly expanding foam to provide buoyancy and contains a light for attracting attention. In addition to being able to launch buoyancy aids it contains two veritcally launched Para-Flares for nightime illumination.
  • 2009 - Automotist
    James Dyson Awards
    Automotist is a revolutionary sprinkler system that can be attached to any standard kitchen tap. Created by London product design graduates Yusuf Muhammad and Paul Thomas this little device can fill a room with a fine mist using the same water system that's connected to your tap. A tiny sensor built into the device detects a fire and then a motorised pump pushes mains water through the misting nozzles.
  • 2008 - Reactiv
    James Dyson Awards
    Reactiv won the JDA back in 2008 and was the brainchild of product design student Michael Chen. It is essentially a 'smart' cycling jacket that uses a series of sensors to help activate LED strips along the jacket. When you brake the LEDs turn red, alerting drivers around you. Raising your arm left or right will activate an indicator strip.
  • 2007 - Senjo
    Senjo
    Senjo won the Dyson Awards back in 2007. It is an innovative sign-language translator that uses digital interfacing to interpret both the spoken word and hand movements which are then relayed back through speech and signs accordingly.
  • Close
    This article exists as part of the online archive for HuffPost Australia. Certain site features have been disabled. If you have questions or concerns, please check our FAQ or contact support@huffpost.com.